Job
Pouch
Material 1 (front / back)
-
Material 2 (gusset)
Accessories
Quantities
Production options
0 = no override. An override can only reduce the calculated ups.
Price
| Quantity | CAD / unit | CAD total | USD / unit | USD total | Markup | Margin |
|---|---|---|---|---|---|---|
| Press Calculate. | ||||||
Frame & web
Minimums & flags
Cost breakdown (per quantity)
| Quantity | Total lin. ft | Waste % | Material | Ink | Lam. | Slit | Convert | Overhead | Total cost USD |
|---|
Webs
| Web | Material | Slit width mm | Cut length mm | Print ups | Around web | Per frame | Frame util. | Press fpm | $/msi |
|---|
Materials — films and accessories
| Name | Type | USD / msi | USD / ft | USD / lb | Supplier | Trial | Active |
|---|
Films are costed per msi (thousand square inches); zippers and tin ties per linear foot;
sliders, valves and spouts per unit (stored in the USD / msi column, as in the workbook).
Material structures — registered laminate build-ups
| Structure | Sub 1 | Sub 2 | Sub 3 | Sub 4 | Solventless | Thermal | Stream | Substitute |
|---|
Sizes & recommended order quantities
| Pouch type | Size | Stream | W mm | H mm | G mm | 2nd? | 2nd req. | Therm. min | Therm./SKU | Solv. min | Solv./SKU | Units |
|---|
Pouch types & geometry rules
Each pouch type carries the formulas that turn width / height / gusset into web geometry.
Variables:
W, H, G, BLEED, TRIM,
FRAME_WIDTH, FRAME_LENGTH, PANEL_WIDTH, PANEL_HEIGHT,
INLINE_BLEEDS, BLOCK_BLEEDS, EYEMARKS, TOTAL_WIDTH,
SLIT_WIDTH, PRINT_UPS, IS_SECONDARY_SEPARATE,
IS_TERTIARY_SEPARATE, IS_ZIPPERED, IS_TERMINATED_GUSSET,
IS_DOY_VIABLE. Functions: IF, MIN, MAX,
INT, ROUND, CEILING.
| Code | Name | Family | Convert ups | Roll stock | Flat bottom | Doy tool | Webs |
|---|
Doy tooling (width x gusset, mm)
| Width | Gusset | Active |
|---|
Zipper compatibility
| Pouch type | Zipper | Allowed |
|---|
Zipper exclusions by size
| Size | Zipper |
|---|
Rate card
Set-up profile (make-ready & speeds)
Machine profile (press frame)
Markup grid
Rows are strategies, columns are quantity tiers. The tier used is the largest one
that does not exceed the produced quantity.
Saved quotes
| Created | Customer | Reference | Pouch | Size | Structure | Breaks |
|---|